Service Data: Differential
WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
DIFFERENTIAL REFERENCE
| Side gear backlash | 0.05 to 0.20 mm (0.0020 to 0.0079 in.) | |
| Thrust washer thickness | Mark - | 1.625 mm (0.0640 in.) |
| Mark - | 1.725 mm (0.0679 in.) | |
| Mark - | 1.825 mm (0.0719 in.) | |
| Preload (turning torque at 60 rpm)) | New bearing | 0.20 to 0.69 N*m (2.0 to 7.0 kgf*cm, 1.8 to 6.1 in.*lbf) |
| Using bearing | 0.10 to 0.35 N*m (1.0 to 3.6 kgf*cm, 0.9 to 3.1 in.*lbf) | |
| Shim thickness | Mark 0 | 2.00 mm (0.0787 in.) |
| Mark 1 | 2.05 mm (0.0807 in.) | |
| Mark 2 | 2.10 mm (0.0827 in.) | |
| Mark 3 | 2.15 mm (0.0846 in.) | |
| Mark 4 | 2.20 mm (0.0866 in.) | |
| Mark 5 | 2.25 mm (0.0886 in.) | |
| Mark 6 | 2.30 mm (0.0906 in.) | |
| Mark 7 | 2.35 mm (0.0925 in.) | |
| Mark 8 | 2.40 mm (0.0945 in.) | |
| Mark 9 | 2.45 mm (0.0965 in.) | |
| Mark A | 2.50 mm (0.0984 in.) | |
| Mark B | 2.55 mm (0.1004 in.) | |
| Mark C | 2.60 mm (0.1024 in.) | |
| Mark D | 2.65 mm (0.1043 in.) | |
| Mark E | 2.70 mm (0.1063 in.) | |
| Mark F | 2.75 mm (0.1083 in.) | |
| Mark G | 2.80 mm (0.1102 in.) | |
| Mark H | 2.85 mm (0.1122 in.) | |
| Mark J | 2.025 mm (0.07972 in.) | |
| Mark K | 2.075 mm (0.08169 in.) | |
| Mark L | 2.125 mm (0.08366 in.) | |
| Mark M | 2.175 mm (0.08563 in.) | |
| Mark N | 2.225 mm (0.08760 in.) | |
| Mark P | 2.275 mm (0.08957 in.) | |
| Mark Q | 2.325 mm (0.09154 in.) | |
| Mark R | 2.375 mm (0.09350 in.) | |
| Mark S | 2.425 mm (0.09547 in.) | |
| Mark T | 2.475 mm (0.09744 in.) | |
| Mark U | 2.525 mm (0.09941 in.) | |
| Mark V | 2.575 mm (0.10138 in.) | |
| Mark W | 2.625 mm (0.10335 in.) | |
| Mark X | 2.675 mm (0.10531 in.) | |
| Mark Y | 2.725 mm (0.10728 in.) | |
| Mark AA | 2.775 mm (0.10925 in.) | |
| Mark AB | 2.825 mm (0.11122 in.) | |