Steering Pad Switch: Inspection

INSPECT STEERING PAD SWITCH RH

Remove the steering pad switch LH connector with the steering pad switch RH and spiral cable still connected.

Fig 1: Identifying Steering Pad Switch Connector Terminal
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Measure the resistance according to the value(s) in the table below.

Standard Resistance

RESISTANCE SPECIFICATION

Tester Connection	Condition	Specified Condition
DISP - EAU	DISP switch is not pushed in.	10 kΩ or higher
DISP - EAU	DISP switch is pushed in.	Below 1Ω

HINT:

If the value is not as specified, replace the steering pad switch RH.