Data List/Active Test

1. Connect the intelligent tester to the DLC3.
2. Monitor the ECU data by following the prompts on the tester screen.

   HINT:

   The intelligent tester has a "Snapshot" function which records the monitored data. Refer to the intelligent tester operator's manual for further details.

HINT:

Using the DATA LIST displayed on the intelligent tester, you can read the value of the switch, sensor, actuator, etc. without parts removal. Reading the DATA LIST as the first step of troubleshooting is one way to shorten the labor time.

Fig 1: Connecting Cable Of Intelligent Tester To DLC3

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch ON.
3. Read the DATA LIST according to the display on the tester.

   MIRROR-L/MIRROR-R 

   DATA LIST REFERENCE
   
   

   Item	Test Details	Diagnostic Note
   MIRR POS SEN V	Vertical mirror position/MIN: 0, MAX: 5 V	Within range from 0 to 5 V
   MIRR POS SEN H	Horizontal mirror position/MIN: 0, MAX: 5 V	Within range from 0 to 5 V
   MIRR MEM 1	Mirror position memorized in memory switch M1/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   MIRR MEM 2	Mirror position memorized in memory switch M2/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized

   MASTER SW 

   DATA LIST REFERENCE
   
   

   Item	Test Details	Diagnostic Note
   SEAT SET SW	Seat memory set switch signal/ON or OFF	ON: Memory set switch is pressed OFF: Memory set switch is not pressed
   SEAT MEM M1	Seat memory switch M1 signal/ON or OFF	ON: Seat memory M1 switch is pressed OFF: Seat memory M1 switch is not pressed
   SEAT MEM M2	Seat memory switch M2 signal/ON or OFF	ON: Seat memory M2 switch is pressed OFF: Seat memory M2 switch is not pressed

   D-SEAT 

   DATA LIST REFERENCE
   
   

   Item	Test Details	Diagnostic Note
   POWER VOLTAGE	Power supply for position control ECU & switch/MIN: 0 V, MAX: 19.89 V	Within range from 11 to 14 V
   IG SW	Ignition switch status/ON or OFF	ON: Ignition switch is ON OFF: Ignition switch is OFF
   KEY UNLOCK SW	Key unlock warning switch signal/ON or OFF	ON: Key is in ignition key cylinder OFF: Key is not in ignition key cylinder
   PNP SW	Park/Neutral position switch signal/ON or OFF	ON: Shift in P position OFF: Shift in any position except neutral
   M1 SW	Seat memory switch M1 signal/ON or OFF	ON: Seat memory switch M1 is ON OFF: Seat memory switch M1 is OFF
   M2 SW	Seat memory switch M2 signal/ON or OFF	ON: Seat memory switch M2 is ON OFF: Seat memory switch M2 is OFF
   SET SW	Seat memory set switch signal/ON or OFF	ON: Memory set switch is ON OFF: Memory set switch is OFF
   MEM M1 SW	Driving position memorized in seat memory switch M1/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   MEM M2 SW	Driving position memorized in seat memory switch M2/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   D-MIRR MEM M1	Driver side mirror position memorized in seat memory switch M1/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   D-MIRR MEM M2	Driver side mirror position memorized in seat memory switch M2/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   P-MIRR MEM M1	Passenger side mirror position memorized in seat memory switch M1/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   P-MIRR MEM M2	Passenger side mirror position memorized in seat memory switch M2/NOT MEM or MEM	MEM: Memorized NOT MEM: Not memorized
   D-MIRR MEM POS 1	Driver side mirror position memorized in seat memory switch M1/MIN: 0, MAX: 65535	Within range from 0 to 65535
   P-MIRR MEM POS 1	Passenger side mirror position memorized in seat memory switch M1/MIN: 0, MAX: 65535	Within range from 0 to 65535
   D-MIRR MEM POS 2	Driver side mirror position memorized in seat memory switch M2/MIN: 0, MAX: 65535	Within range from 0 to 65535
   P-MIRR MEM POS 2	Passenger side mirror position memorized in seat memory switch M2/MIN: 0, MAX: 65535	Within range from 0 to 65535

   BODY 

   DATA LIST REFERENCE
   
   

   Item	Test Details	Diagnostic Note
   MIRR SEL SW R	Mirror selection switch signal for RH mirror/ON or OFF	ON: Switch is in Right position OFF: Switch is in neutral or Left position
   MIRR SEL SW L	Mirror selection switch signal for LH mirror/ON or OFF	ON: Switch is in Left position OFF: Switch is in neutral or Right position
   MIRR POS SW R	Mirror position switch signal (Right)/ON or OFF	ON: Switch R is ON OFF: Any switch except R is ON or all switches are OFF
   MIRR POS SW L	Mirror position switch signal (Left)/ON or OFF	ON: Switch L is ON OFF: Any switch except L is ON or all switches are OFF
   MIRR POS SW UP	Mirror position switch signal (Up)/ON or OFF	ON: Switch UP is ON OFF: Any switch except UP is ON or all switches are OFF
   MIRR POS SW DWN	Mirror position switch signal (Down)/ON or OFF	ON: Switch DOWN is ON OFF: Any switch except DOWN is ON or all switches are OFF

HINT:

Performing the ACTIVE TEST using the intelligent tester allows you to operate the relay, VSV, actuator, etc. without parts removal. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten the labor time. It is possible to display the DATA LIST during the ACTIVE TEST.

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch ON.
3. Perform the ACTIVE TEST according to the display on the tester.

   MIRROR-L/MIRROR-R 

   DATA LIST REFERENCE
   
   

   Item	Test Details
   MIRR UP/DOWN	Mirror vertical operation: UP/DOWN
   MIRR RIGHT/LEFT	Mirror horizontal operation: RIGHT/LEFT
   MIRR HEATER	Mirror heater operation: OFF/ON