LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 350 FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> Rear Combination Light Assembly >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY 
    1. Disconnect the rear combination light assembly connector.
    2. Measure the voltage according to the value(s) in the table below.
      Fig 1: Identifying Rear Combination Light Assembly Connector Terminals
      G05005811Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Voltage 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester connection Condition Specified condition
      1 - 2 Brake pedal released Below 1 V
      1 - 2 Brake pedal depressed 10 to 14 V
    3. Measure the resistance of the rear combination light according to the value(s) in the table below.

      Resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester connection Condition Specified condition
      1 - 2 Always 317 to 347 Ω

      If the result is not as specified, replace the light.

scientia non olet · About LEMON Manuals