LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 350 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Mirror >> Outer Rear View Mirror >> Inspection

Outer Rear View Mirror: Inspection

  1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (W/ MEMORY) 
    1. Inspect outer mirror motor operation.
      1. Remove the outer rear view mirror assembly.
      2. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 1 (RMVR)
        Battery negative (-) → Terminal 10 (RM+R)        		 Turns upward (A)
        Battery positive (+) → Terminal 10 (RM+R)
        Battery negative (-) → Terminal 1 (RMVR)        		 Turns downward (B)
        Battery positive (+) → Terminal 9 (RMHR)
        Battery negative (-) → Terminal 10 (RM+R)        		 Turns left (C)
        Battery positive (+) → Terminal 10 (RM+R)
        Battery negative (-) → Terminal 9 (RMHR)        		 Turns right (D)
        Fig 1: Identifying Outer Mirror Motor Operation
        G05274359Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 4 (HTR+)
        Battery negative (-) → Terminal 12 (HTR-)        		 Mirror surface temperature becomes higher
    3. Inspect electrochromatic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 7 (EC+)
        Battery negative (-) → Terminal 15 (EC)        		 Mirror surface changes to dark
        Fig 2: Identifying Electrochromatic Outer Mirror Operation
        G05274360Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (W/O MEMORY) 
    1. Inspect outer mirror motor operation.
      1. Remove the outer rear view mirror assembly.
      2. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 2 (MV)
        Battery negative (-) → Terminal 1 (M+)        		 Turns upward (A)
        Battery positive (+) → Terminal 1 (M+)
        Battery negative (-) → Terminal 2 (MV)        		 Turns downward (B)
        Battery positive (+) → Terminal 6 (MH)
        Battery negative (-) → Terminal 1 (M+)        		 Turns left (C)
        Battery positive (+) → Terminal 1 (M+)
        Battery negative (-) → Terminal 6 (MH)        		 Turns right (D)
        Fig 3: Identifying Outer Mirror Motor Operation
        G05274361Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 7 (HTR+)
        Battery negative (-) → Terminal 3 (HTR-)        		 Mirror surface temperature becomes higher
    3. Inspect electrochromatic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 4 (EC+)
        Battery negative (-) → Terminal 5 (EC)        		 Mirror surface changes to dark
        Fig 4: Identifying Electrochromatic Outer Mirror Operation
        G05274362Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (W/ MEMORY) 
    1. Inspect outer mirror motor operation.
      1. Remove the outer rear view mirror assembly.
      2. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 1 (LMVR)
        Battery negative (-) → Terminal 10 (LM+R)        		 Turns upward (A)
        Battery positive (+) → Terminal 10 (LM+R)
        Battery negative (-) → Terminal 1 (LMVR)        		 Turns downward (B)
        Battery positive (+) → Terminal 9 (LMHR)
        Battery negative (-) → Terminal 10 (LM+R)        		 Turns left (C)
        Battery positive (+) → Terminal 10 (LM+R)
        Battery negative (-) → Terminal 9 (LMHR)        		 Turns right (D)
        Fig 5: Identifying Outer Mirror Motor Operation
        G05274363Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 4 (HTR+)
        Battery negative (-) → Terminal 12 (HTR-)        		 Mirror surface temperature becomes higher
    3. Inspect electrochromatic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 7 (EC+)
        Battery negative (-) → Terminal 15 (EC)        		 Mirror surface changes to dark
        Fig 6: Identifying Electrochromatic Outer Mirror Operation
        G05274364Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (W/O MEMORY) 
    1. Inspect outer mirror motor operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 2 (MV)
        Battery negative (-) → Terminal 1 (M+)        		 Turns upward (A)
        Battery positive (+) → Terminal 1 (M+)
        Battery negative (-) → Terminal 2 (MV)        		 Turns downward (B)
        Battery positive (+) → Terminal 6 (MH)
        Battery negative (-) → Terminal 1 (M+)        		 Turns left (C)
        Battery positive (+) → Terminal 1 (M+)
        Battery negative (-) → Terminal 6 (MH)        		 Turns right (D)
        Fig 7: Identifying Outer Mirror Motor Operation
        G05274365Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 7 (HTR+)
        Battery negative (-) → Terminal 3 (HTR-)        		 Mirror surface temperature becomes higher
    3. Inspect electrochromatic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        STANDARD REFERENCE TABLE

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 4 (EC+)
        Battery negative (-) → Terminal 5 (EC)        		 Mirror surface changes to dark
        Fig 8: Identifying Electrochromatic Outer Mirror Operation
        G05274366Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals