LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> RX 350 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation >> Navigation Ecu >> Installation

Navigation Ecu: Installation

  1. INSTALL DISC PLAYER BRACKET 
    1. Install the disc player bracket with the 2 screws.
      Fig 1: Identifying Disc Player Bracket With Screws
      G05271019Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 DISC PLAYER BRACKET 
    1. Install the No. 2 disc player bracket with the 2 screws.
      Fig 2: Identifying No. 2 Disc Player Bracket With Screws
      G05271018Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL NAVIGATION ECU 
    1. Install the navigation ECU with the 3 nuts.
      Fig 3: Identifying Navigation ECU With Nuts
      G05271017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect each connector.
  4. INSTALL DECK SIDE TRIM BOX LH 
  5. INSTALL DECK SIDE TRIM BOX RH 
  6. INSTALL REAR FLOOR FINISH PLATE 
  7. INSTALL DECK NO. 3 BOARD SUB-ASSEMBLY 
  8. INSTALL DECK NO. 2 BOARD SUB-ASSEMBLY 
  9. INSTALL DECK FLOOR BOX REAR 
  10. INSTALL DECK FLOOR BOX FRONT 
  11. INSTALL JACK CARRIER ASSEMBLY 
  12. INSTALL JACK ASSEMBLY 
  13. INSTALL JACK CARRIER SUPPORT 
  14. INSTALL TONNEAU COVER ASSEMBLY 
  15. INSTALL DECK BOARD SUB-ASSEMBLY 
  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  17. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
scientia non olet · About LEMON Manuals