Pump Attenuator: Removal

1. Connect the hose to the bleeder plug for height control accumulator and loosen the bleeder plug.
   Fig 1: Connecting Hose To Bleeder Plug

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug remove the hose.

Torque: 6.9 N*m (70 kgf*cm, 61 in.*lbf) 

1. Using SST, disconnect the inlet fluid from the pump actuator.

   SST 09751-36011 

   Torque: 15 N*m (155 kgf*cm, 11 ft.*lbf) 

   Fig 2: Disconnecting Inlet Fluid From Pump Attenuator Using SST

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, disconnect the outlet fluid line from the pump actuator.

   SST 09023-38401 

   Torque: 30 N*m (310 kgf*cm, 22 ft.*lbf) 

3. Remove the 2 bolts and pump actuator.

   Torque: 18 N*m (185 kgf*cm, 13 ft.*lbf) 

4. Remove the 2 collars and cushions.

Fig 3: Disconnecting Outlet Fluid Line From Pump Attenuator

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002