Rear Heater Unit: Inspection
- INSPECT BLOWER MOTOR
- Connect the battery positive (+) lead to terminal 1 and battery negative (-) lead to terminal 2, and then check that the motor rotates smoothly. If the operation is not as specified, replace the blower motor.
- INSPECT AIR MIX SERVO MOTOR
- Inspect the air mix servo motor (see DTC 47 REAR AIR MIX DAMPER CONTROL SERVO MOTOR CIRCUIT ).
- INSPECT AIR MIX DAMPER POSITION SENSOR
- Inspect the air mix damper position sensor (see DTC 37 REAR AIR MIX DAMPER POSITION SENSOR CIRCUIT; DTC 47 REAR AIR MIX DAMPER CONTROL SERVO MOTOR CIRCUIT ).
- INSPECT AIR INLET TEMPERATURE SENSOR
- Inspect the air inlet temperature sensor (see DTC 26 SYSTEM TOO RICH ).