Data List / Active Test

READ DATA LIST

HINT:

Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

Connect the intelligent tester (with CAN VIM) to the DLC3.
Turn the ignition switch ON.
Read the DATA LIST according to the display on the tester.

Body ECU (main)

DATA LIST / ACTIVE TEST

Item	Measurement Item/Display (Range)	Normal Condition	Diagnostic Note
D DOR CTY SW	Driver's door courtesy SW signal	ON: Driver's door is open OFF: Driver's door is closed	-
P DOR CTY SW	Passenger's door courtesy SW signal	ON: Passenger's door is open OFF: Passenger's door is closed	-
Rr DOR CTY SW	Rear door courtesy SW signal	ON: Either right or left ear door is open OFF: Both the right and left doors are closed	-
DIMMER SW	Dimmer SW signal	ON: Dimmer SW is on (High Beam) or High flasher SW is on OFF: Dimmer SW is OFF (Low Beam) or High flasher SW is off	-
HIGH FLASHER SW	High flasher SW signal	ON: High flasher SW is on OFF: High flasher SW is off	-
AUTO LIGHT SW	Auto light SW signal	ON: Light control SW is Auto position OFF: Light control SW is in except Auto position	-
HEAD LIGHT SW	Head light SW signal	ON: Light control SW is in HEAD position OFF: Light control SW is in except HEAD position	-
TAIL LIGHT SW	Taillight SW signal/ON	ON: Light control SW is in TAIL or HEAD position OFF: Light control SW is in OFF or AUTO position	-
TAIL CANCEL SW	Tail cancel switch	ON: Tail cancel switch is ON position OFF: Tail cancel switch is OFF position	-
DRL FUNCTION	DRL function	ON: DRL is ON position OFF: DRL is OFF position	-
ILLUMINATE RATE	Illumination rate information	-	-
LIGHTING TIME	Lighting time	7.5 s./15 s./30 s.	-
ILLUMI SYSTEM	Operation of illumination system	ON: Illumination is ON position OFF: Illumination is OFF position	-
LIGHT CONTROL	Light control condition of illumination system	ON: Illumination system is ON OFF: Illumination system is OFF	-
I/L ON/ACC OFF	Light the I/L when ACC OFF	ON: Light the I/L when ACC OFF is ON position OFF: Light the I/L when ACC OFF is OFF position	-
I/L ON/UNLOCK	Interior light ON w/unlock	ON: Interior light ON w/unlock is ON position OFF: Interior light ON w/unlock is OFF position	-
RESPONSE TIME	Response time	0.1 s./1.0 s.	-

PERFORM ACTIVE TEST

HINT:

Performing the intelligent tester's Active Test allows relay, VSV, actuator and other item values to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The DATA LIST can be displayed during the Active Test.

Connect the intelligent tester (with CAN VIM) to the DLC3.
Turn the ignition switch ON.
Perform the ACTIVE TEST according to the display on the tester.

Body ECU (main)

ACTIVE TEST

Item	Test Details	Diagnostic Note
HAZARD	Turns Hazard light flasher relay ON/OFF	-
HEAD	LIGHT Turns Head light relay ON/OFF	-
	HEAD LIGHT (HI) Turns Head light relay ON/OFF	-
	TAIL LIGHT Turns Tail light relay ON/OFF	-
DRL RLY	(Test Details) Turns DRL relay ON/OFF (Vehicle Condition) IG SW is ON, Engine is stopped and Light control SW is in OFF position.	-
DIMMER SIG	Turns auto dimmer ON/OFF	-
ILLUMI OUTPUT	(Test Details) Turns Interior light and key illumination ON/OFF (Vehicle Condition) Interior light SW is in Door position	-
OPN DOR WRN LGT	Open door warning light ON/OFF	-
R ROOM LIGHT	Rear room light ON/OFF	-
DOOM RLY CUT	Doom light ON/OFF	-

Sub body ECU

SUB BODY ECU REFERENCE

Item	Test Details	Diagnostic Note
CONSOLE LIGHT	Center console light ON/OFF	-
STEP LIGHT	Side step light and outer foot light ON/OFF	IG = NO key and all doors are locked
SCUFF PLATE LEG	Foot light and inside door handle illumination ON/OFF	-