Inspection Procedure

1. Clear the DTC (see DTC CHECK / CLEAR  ).
2. Perform a road test.
3. Check for DTC (see DTC CHECK / CLEAR  ).

   Result 

   RESULT CHART
   
   

   Condition	Proceed to
   DTC is output	A
   DTC is not output	B

   HINT:

   If a CAN communication malfunction DTC and a related sensor malfunction DTC are output at the same time, the CAN communication malfunction must be repaired before troubleshooting the sensor malfunction DTC.

B: USE SIMULATION METHOD TO CHECK  (See HOW TO PROCEED WITH TROUBLESHOOTING )

A: GO TO CAN COMMUNICATION SYSTEM  (See CAN COMMUNICATION SYSTEM )