LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Center Airbag Sensor Assembly >> Removal

Center Airbag Sensor Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH  (See REMOVAL )
  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE NO. 3 BOX PANEL  (See REMOVAL )
  6. REMOVE REAR UPPER CONSOLE PANEL  (See REMOVAL )
  7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  8. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE LOWER CONSOLE COVER  (See REMOVAL )
  10. REMOVE CONSOLE BOX ASSEMBLY  (See REMOVAL )
  11. REMOVE CENTER AIRBAG SENSOR ASSEMBLY 
    1. Disconnect the holder (with connectors).
    2. Remove the 3 bolts and airbag sensor.
      Fig 1: Locating Bolts And Airbag Sensor
      G04951314Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals