Air Conditioning Amplifier: Removal
- REMOVE COWL TOP VENTILATOR LOUVER RH (See REMOVAL )
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See REMOVAL )
- REMOVE INSTRUMENT SIDE PANEL RH (See REMOVAL )
- REMOVE NO. 2 INSTRUMENT CLUSTER MOULDING (See REMOVAL )
- REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See REMOVAL )
- REMOVE INSTRUMENT PANEL LOWER (See REMOVAL )
- REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See REMOVAL )
- REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See REMOVAL )
- REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
- Disconnect the 3 connectors.
- Remove the screw and amplifier.