LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 780 (Engine Control System - DTCS U0101 To P0153) >> P0127 IAT Sensor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK INTAKE AIR TEMPERATURE SENSOR
    1. Turn ignition switch OFF.
    2. Disconnect mass air flow sensor harness connector.
    3. Check resistance between mass air flow sensor terminals as per the following.
      TERMINAL RESISTANCE CHART

      Terminal Condition Resistance (kΩ)
      1 and 2 Temperature [°C (°F)] 25 (77) 1.800 - 2.200
      Fig 1: Checking Resistance Between Mass Air Flow Sensor Terminals
      G05869761Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace mass air flow sensor (with intake air temperature sensor).

scientia non olet · About LEMON Manuals