5. Check Condenser Power Supply Circuit-I
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF.
- Reconnect all harness connectors disconnected.
- Disconnect condenser harness connector.
- Turn ignition switch ON.
- Check voltage between condenser terminal 1 and ground with CONSULT-II or tester.
- Voltage: Battery voltage
- Also check harness for short to ground and short to power.
OK or NG
- OK : GO TO 9 .
- NG : GO TO 6.