LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Engine Controls - System & Component Testing) >> ASCD Brake Switch >> Diagnostic Procedure >> 15. Check Stop Lamp Switch Input Signal Circuit For Open And Short

15. Check Stop Lamp Switch Input Signal Circuit For Open And Short

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ECM harness connector.
  2. Check harness continuity between ECM terminal 101 and stop lamp switch terminal 2.

    Refer to Wiring Diagram.

    1. Continuity should exist. 
  3. Also check harness for short to ground and short to power.

OK or NG 

  1. OK : GO TO 17 .
  2. NG : GO TO 16.