LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Engine Control System - DTC) >> DTC P1278, P1288: A/F Sensor >> Diagnostic Procedure >> 5. Clear The Self-Learning Data >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to normal operating temperature.
  2. Select "SELF-LEARNING CONT" in "WORK SUPPORT" mode with CONSULT-II.
  3. Clear the self-learning control coefficient by touching "CLEAR" or "START".
  4. Run engine for at least 10 minutes at idle speed.

    Is the 1st trip DTC P0171, P172, P0174 or P0175 detected? 

    Is it difficult to start engine? 

Fig 1: Locating MAF/IAT Sensor
G00877557Courtesy of NISSAN MOTOR CO., U.S.A.