4. Check Seat Memory Switch Indicator Signal

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Connect seat memory switch.
Turn ignition switch ON.
Check continuity between automatic drive positioner control unit connector M33 terminals 12, 13 and ground.
12 (P) - Ground : Battery voltage

13 (Y/G) - Ground : Battery voltage

Fig 1: Checking Continuity

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK >> Replace automatic drive positioner control unit.
NG >> Replace seat memory switch.