DTC Confirmation Procedure
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Start the engine under the following conditions and wait for at least 10 seconds.
- CVT selector lever is in the P or N position
- Depress the brake pedal.
- Drive the vehicle for at least 10 seconds at a speed greater than 4 km/h (2 MPH).
- Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES: Refer to "DIAGNOSIS PROCEDURE ".
NO: Inspection End.
- Start the engine under the following conditions and wait for at least 10 seconds.