LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 640 (Security Control System) >> Component Diagnosis >> B2601 Shift Position >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON under the following conditions, and wait for at least 2 seconds.
      • CVT selector lever is in the P position.
      • Do not depress the brake pedal.
    2. Check "Self diagnostic result" with CONSULT-III.
    3. Turn ignition switch ON under the following conditions, and wait for at least 2 seconds.
      • CVT selector lever is in other than P position.
      • Do not depress the brake pedal.
    4. Check "Self diagnostic result" with CONSULT-III.

      Is DTC detected? 

      YES: Refer to "DIAGNOSIS PROCEDURE ".

      NO: Inspection End.

scientia non olet · About LEMON Manuals