DTC Confirmation Procedure
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press the push-button ignition switch under the following conditions and wait for at least 1 second.
- CVT selector lever is in the P or N position
- Do not depress the brake pedal
- Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES: Refer to "DIAGNOSIS PROCEDURE ".
NO: Inspection End.
- Press the push-button ignition switch under the following conditions and wait for at least 1 second.