Inspection After Disassembly
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Cylinder Body
Check the inner cylinder wall for corrosion, wear, and damage. If a defect is detected, replace the cylinder body.
CAUTION:
Clean the cylinder body using new brake fluid. Never use mineral oils such as gasoline or kerosene.
Torque Member
Check the torque member for wear, cracks, and damage. If a defect is detected, replace the torque member.
Piston
Check the piston surface for corrosion, wear, and damage. If a defect is detected, replace the piston.
CAUTION:
The piston sliding surface is plated. Do not polish the piston with sandpaper.
Sliding Pin, Sliding Pin Bolt, and Sliding Pin Boot
Check the sliding pin, sliding pin bolt, and sliding pin boot for wear, damage, and cracks. If a defect is detected, replace the components as necessary.