Component Inspection (Front Blower Motor Relay)
WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FRONT BLOWER MOTOR RELAY
- Turn ignition switch OFF.
- Remove front blower motor relay.
- Check the continuity between front blower motor relay terminals under the following conditions.
CONTINUITY SPECIFICATION
| Terminals | Condition | Continuity |
|---|---|---|
| 3 and 5 | 12V direct current supply between terminals 1 and 2 | Yes |
| No current supply | No |
Is the inspection result normal?
YES: Inspection End.
NO: Replace front blower motor relay.