LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 610 (Power Window Control System) >> LH & RH Front Window Anti-Pinch >> Basic Inspection >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Special Repair Requirement >> Initialization Procedure

Initialization Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery negative terminal or power window main switch connector. Reconnect it after a minute or more.
  2. Turn ignition switch ON.
  3. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open)
  4. Continue pulling the power window switch UP (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 4 seconds or more.
  5. Inspect anti-pinch function.
scientia non olet · About LEMON Manuals