LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 517 (Brake Control System) >> VDC/TCS/Abs >> G Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove center console. Refer to "FRONT CENTER CONSOLE ".
  2. Disconnect harness connector.
  3. Remove attaching nuts and remove yaw rate/side/decel G sensor.
    CAUTION:
    • Do not drop or strike the yaw rate/side/decel G sensor.
    • Do not use power tools to remove or install yaw rate/side/decel G sensor.
    Fig 1: Yaw Rate/Side/Decel G Sensor With Torque Specifications
    G04916572Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals