Lifting Sensor (Rear) Circuit Inspection

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

CHECK REAR END LIFTING SENSOR INPUT/OUTPUT SIGNAL

With CONSULT-II

Check operation with "LIFT RR PULSE" on the DATA MONITOR to make sure pulse changes.

DATA MONITOR REFERENCE

Monitor item [OPERATION or UNIT]		Contents
LIFT RR PULSE	-	The rear lifting position (pulse) judged from the lifting sensor (rear) is displayed.

Fig 1: CONSULT II Display - DATA MONITOR

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II

Turn ignition switch OFF.

Check signal between driver seat control unit connector and ground, with oscilloscope.

TERMINALS SIGNAL REFERENCE

Connector	Terminals		Condition	Signal
Connector	(+)	(-)	Condition	Signal
B401	10	Ground	Lifting motor (rear) operation	Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Signal Between Driver Seat Control Unit Connector Terminal 10 And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK: Rear lifting sensor circuit is OK.

NG: GO TO 2.

CHECK REAR LIFTING SENSOR CIRCUIT HARNESS CONTINUITY
1. Disconnect driver seat control unit and lifting motor (rear).
2. Check continuity between driver seat control unit connector B401 terminals 10, 16, 31 and lifting motor (rear) connector B406 terminals 1, 2, 3.
  10 - 2 : Continuity should exist.
  
  16 - 3 : Continuity should exist.
  
  31 - 1 : Continuity should exist.
3. Check continuity between driver seat control unit connector B401 terminals 10, 16, 31 and ground.
  10 - Ground : Continuity should not exist.
  
  16 - Ground : Continuity should not exist.
  
  31 - Ground : Continuity should not exist.
OK or NG

OK: Replace lifting motor (rear). Refer to "FRONT SEAT ".

NG: Repair or replace harness.

Fig 3: Checking Continuity Between Driver Seat Control Unit Connector B401 Terminals 10, 16, 31 And Ground, And Between Connector B401 Terminals 10, 16, 31 And Lifting Motor (Rear) Connector B406 Terminals 1, 2, 3
Courtesy of NISSAN MOTOR CO., U.S.A.