LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Brake Controls System - Abs) >> Wheel Sensors >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove ABS sensor mounting screw.
    • When removing the front ABS sensor, first remove the disc rotor to gain access to the front ABS sensor mounting bolt.
  2. Pull out the sensor, being careful to turn it as little as possible.
    CAUTION:
    • Be careful not to damage sensor edge and sensor rotor teeth.
    • Do not pull on the sensor harness.
  3. Disconnect ABS sensor harness electrical connector, then remove harness from mounts.
scientia non olet · About LEMON Manuals