LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior >> Rear Bumper >> Disassembly

Rear Bumper: Disassembly

  1. REMOVE REAR BUMPER PROTECTOR 
    1. Remove the 2 protectors.
  2. REMOVE REAR BUMPER PIECE LH 
    1. Using a screwdriver, detach the 2 claws and remove the bumper piece.

      HINT:

      • Tape the screwdriver tip before use.
      • Detach the claw on the inner side first.
      2. Fig 1: Identifying Rear Bumper Piece
      G04946468Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE REAR BUMPER PIECE RH 

    HINT:

    Use the same procedures described for the LH side.

  4. REMOVE REAR BUMPER SIDE RETAINER LH 
    1. Remove the 2 bolts and retainer.
      2. Fig 2: Identifying Rear Bumper Side Retainer Bolts
      G04946469Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE REAR BUMPER SIDE RETAINER RH 

    HINT:

    Use the same procedures described for the LH side.

  6. REMOVE REAR BUMPER EXTENSION LH 
    1. Remove the 4 bolts and bumper extension.
      2. Fig 3: Identifying Rear Bumper Extension Bolts
      G04946470Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REAR BUMPER EXTENSION RH 

    HINT:

    Use the same procedures described for the LH side.

  8. REMOVE NO. 3 LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System)  (See REMOVAL )
  9. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)  (See REMOVAL )
  10. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)  (See REMOVAL )
scientia non olet · About LEMON Manuals