Front Bumper: Reassembly

INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
1. Install the No. 1 ultrasonic sensor (see INSTALLATION ).
INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
1. Install the No. 1 ultrasonic sensor retainer (see INSTALLATION ).
INSTALL NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
1. Install the No. 2 ultrasonic sensor (see INSTALLATION ).
INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
1. Install the No. 2 ultrasonic sensor retainer (see INSTALLATION ).
REMOVE NO. 4 ENGINE ROOM WIRE (w/ Intuitive Parking Assist System) (See INSTALLATION )
INSTALL FOG LIGHT ASSEMBLY LH (See INSTALLATION )
INSTALL FOG LIGHT ASSEMBLY RH
HINT:

Use the same procedures described for the LH side.
INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET
1. Install the mounting bracket with the 2 screws.
  
  Fig 1: Identifying Front Bumper Extension Mounting Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR GRILLE LOWER LH
1. Attach the 16 claws to install the radiator grille lower.
INSTALL RADIATOR GRILLE LOWER RH
HINT:

Use the same procedures described for the LH side.
INSTALL FRONT BUMPER COVER LOWER
1. Attach the 2 claws to install the bumper hole cover.
  HINT:
  
  Attach the claw on the outer side first.
  
  Fig 3: Identifying Bumper Hole Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002