LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior >> Front Bumper >> Disassembly

Front Bumper: Disassembly

  1. REMOVE FRONT BUMPER COVER LOWER 
    1. Using a screwdriver, detach the 2 claws and remove the bumper cover lower.

      HINT:

      • Tape the screwdriver tip before use.
      • Detach the claw on the inner side first.
      Fig 1: Identifying Front Bumper Cover Lower
      G04946435Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE RADIATOR GRILLE LOWER LH 
    1. Detach the 16 claws and remove the radiator grille lower.
      Fig 2: Identifying Radiator Grille Lower
      G04946436Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE RADIATOR GRILLE LOWER RH 

    HINT:

    Use the same procedures described for the LH side.

  4. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET 
    1. Remove the 2 screws and mounting bracket.
      2. Fig 3: Identifying Front Bumper Extension Mounting Bracket
      G04946437Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FOG LIGHT ASSEMBLY LH  (See REMOVAL )
  6. REMOVE FOG LIGHT ASSEMBLY RH 

    HINT:

    Use the same procedures described for the LH side.

  7. REMOVE NO. 4 ENGINE ROOM WIRE (w/ Intuitive Parking Assist System)  (See REMOVAL )
  8. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)  (See REMOVAL )
  9. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)  (See REMOVAL )
  10. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)  (See REMOVAL )
  11. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)  (See REMOVAL )
scientia non olet · About LEMON Manuals