LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent >> Theft Deterrent System >> Customize Parameters

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM (REFERENCE) (EXCEPT KOREA) 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect the intelligent tester or Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the tester on.
    4. Enter the following menus:
      1. Intelligent tester - Select: CUSTOMIZE /
      2. Techstream - Select: Customize Setting /
    5. Select the setting by referring to the table below.
      1. Intelligent tester

        SECURITY 

        INTELLIGENT TESTER - SECURITY REFERENCE CHART

        Display (Item) Default Contents Setting
        WARNING(HORN) ON Function that allows vehicle horns and theft deterrent horn to be used as warning device. ON / OFF
        PASSIVE MODE OFF Passive arming mode is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed.
        In passive arming mode, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see entry delay below) after door is opened:
        • Unlock any door by key or wireless operation
        • Turn engine switch on (IG)
        		 ON / OFF
        ENTRY DELAY 14s Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE 0 s/ 14 s /30 s
      2. Techstream

        Security 

        TECHSTREAM - SECURITY REFERENCE CHART

        Display (Item) Default Contents Setting
        Warning by Horn ON Function that allows vehicle horns and theft deterrent horn to be used as warning device. ON / OFF
        Passive Mode (Security System) OFF Passive arming mode is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed.
        In passive arming mode, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see entry delay below) after door is opened:
        • Unlock any door by key or wireless operation
        • Turn engine switch on (IG)
        		 ON / OFF
        Entry Delay Time 14s Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE 0 s / 14 s / 30 s
scientia non olet · About LEMON Manuals