Security Horn Assembly: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL SECURITY HORN ASSEMBLY 
   1. Install the horn with the bolt.
   2. Connect the connector.
2. INSTALL COWL TOP VENTILATOR LOUVER LH  (See INSTALLATION )
3. INSTALL FRONT FENDER TO COWL SIDE SEAL LH  (See INSTALLATION )
4. INSTALL FRONT FENDER TO COWL SIDE SEAL RH  (See INSTALLATION )
   Fig 1: Locating Security Horn Assembly Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. INSTALL HOOD TO COWL TOP SEAL  (See INSTALLATION )
6. INSTALL FRONT UPPER FENDER PROTECTOR LH  (See INSTALLATION )
7. INSTALL FRONT UPPER FENDER PROTECTOR RH  (See INSTALLATION )
8. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION )
9. INSTALL ENGINE ROOM SIDE COVER RH  (See INSTALLATION )
10. INSTALL FRONT WIPER ARM LH  (See INSTALLATION )
11. INSTALL FRONT WIPER ARM RH  (See INSTALLATION )