Rear Door Lock: Installation

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. INSTALL REAR DOOR INSIDE LOCKING LH CABLE ASSEMBLY  (See INSTALLATION )
2. INSTALL REAR DOOR LOCK REMOTE CONTROL LH CABLE ASSEMBLY  (See INSTALLATION )
3. INSTALL REAR DOOR LOCK ASSEMBLY LH  (See INSTALLATION )
4. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH  (See INSTALLATION )
5. INSTALL REAR DOOR QUARTER WINDOW GLASS LH  (See INSTALLATION )
6. INSTALL REAR DOOR GLASS RUN LH  (See INSTALLATION )
7. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH  (See INSTALLATION )
8. INSTALL RR DOOR DIVISION BAR BRACKET LWR LH  (See INSTALLATION )
9. INSTALL REAR DOOR SERVICE HOLE COVER LH  (See INSTALLATION )
10. INSTALL REAR INNER DOOR GLASS WEATHERSTRIP LH  (See INSTALLATION )
11. INSTALL SIDE TRIM BOARD COVER REAR LH (w/ Rear Door Sunshade)  (See INSTALLATION )
12. INSTALL NO. 1 AUTO CURTAIN RAIL BRACKET LH (w/ Rear Door Sunshade)  (See INSTALLATION )
13. INSTALL REAR LH CURTAIN SUB-ASSEMBLY (w/ Rear Door Sunshade)  (See INSTALLATION )
14. INSTALL REAR NO. 2 DOOR FRAME GARNISH LH  (See INSTALLATION )
15. INSTALL REAR DOOR FRAME GARNISH LH  (See INSTALLATION )
16. INSTALL REAR DOOR TRIM COVER LH  (See INSTALLATION )
17. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH  (See INSTALLATION )
18. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY  (See INSTALLATION )
19. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH  (See INSTALLATION )
20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
21. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
22. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
       NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.