Inspection Procedure
- CHECK DTC OUTPUT
- Connect the intelligent tester or Techstream to the DLC3.
- Turn the engine switch on (IG) and turn the tester ON.
- Clear DTCs (see DTC CHECK / CLEAR ).
- Read DTCs (see DTC CHECK / CLEAR
).
Result
RESULT CHARTResult Proceed to C1645/5C-71 reappears A No DTCs are output B
B: USE SIMULATION METHOD TO CHECK (See HOW TO PROCEED WITH TROUBLESHOOTING )
A: GO TO POWER STEERING SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING )