LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Rear Room Light Assembly >> Inspection

Rear Room Light Assembly: Inspection

  1. INSPECT SPOT LIGHT ASSEMBLY 
    1. LED illumination inspection
      1. Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
        Fig 1: Inspecting LED Illumination
        G04944896Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        OK 

        LED ILLUMINATION

        Tester Connection Specified Condition
        10 (RRMP) - 3 (RGND) Rear spot light RH illuminates
        2 (RLMP) - 3 (RGND) Rear spot light LH illuminates
    2. Measure the resistance according to the value(s) in the table below.
      Fig 2: Inspecting Spot Light Assembly
      G04944897Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      SPOT LIGHT ASSEMBLY RESISTANCE

      Tester Connection Condition Specified Condition
      5 (RRSW) - 3 (RGND) Switch on both sides OFF 10 kΩ or higher
      4 (RLSW) - 3 (RGND) Switch on both sides OFF 10 kΩ or higher
      5 (RRSW) - 3 (RGND) Rear right side switch ON Below 1 Ω
      4 (RLSW) - 3 (RGND) Rear left side switch ON Below 1 Ω
scientia non olet · About LEMON Manuals