Headlight Dimmer Switch: Inspection
- INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY
- Check the light control switch.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
LIGHT CONTROL SWITCHTester Connection Switch Condition Specified Condition 13{T)-11 (H)-12{A)-19 (EL) Light control switch OFF 10 kΩ or higher 13 (T) -19 (EL) Light control switch TAIL Below 1 Ω 13 (T)-11 (H)-19 (EL) Light control switch HEAD Below 1 Ω 12 (A) -19 (EL) Light control switch AUTO Below 1 Ω If the result is not as specified, replace the headlight dimmer switch.
- Measure the resistance according to the value(s) in the table below.
- Check the headlight dimmer switch.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
HEADLIGHT DIMMER SWITCHTester Connection Switch Condition Specified Condition 14 (HF)-19 (EL) Headlight dimmer switch FLASH Below 1 Ω 15 (HL)-19 (EL) Headlight dimmer switch LOW BEAM Below 1 Ω 20 (HU)-19 (EL) Headlight dimmer switch HI BEAM Below 1 Ω If the result is not as specified, replace the headlight dimmer switch.
HINT:
Perform the "LOW BEAM" and "HI BEAM" inspection with the light control switch on "HEAD".
- Measure the resistance according to the value(s) in the table below.
- Check the turn signal switch.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
TURN SIGNAL SWITCHTester Connection Switch Condition Specified Condition 17 (CR)-16 (TR)-19 (EL) Turn signal switch right turn Below 1 Ω 16 (TR)-19 (EL) Turn signal switch right lane change Below 1 Ω 17 (CR)-16 (TR)-18 (TL)-19 (EL) Turn signal switch neutral 10 kΩ or higher 18 (TL) -19 (EL) Turn signal switch left lane change Below 1 Ω. 17 (CR)-18 (TL)-19 (EL) Turn signal switch left turn Below 1 Ω If the result is not as specified, replace the headlight dimmer switch.
- Measure the resistance according to the value(s) in the table below.
- Check fog light switch.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
FOG LIGHT SWITCHTester Connection Switch Condition Specified Condition 7 (BFOG) - 8 (LFOG) Front fog light switch OFF 10 kΩ or higher 7 (BFOG) - 8 (LFOG) Front fog light switch ON Below 1 Ω If the result is not as specified, replace the front fog light switch.
- Measure the resistance according to the value(s) in the table below.
- Check rear fog light switch.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
REAR FOG LIGHT SWITCHTester Connection Switch Condition Specified Condition 9 (B) - 7 (BFOG) - 8 (LFOG) Rear fog light switch OFF 10 kΩ or higher 9 (B) - 7 (BFOG) - 8 (LFOG) Rear fog light switch ON Below 1 Ω If the result is not as specified, replace the rear fog light switch.
- Measure the resistance according to the value(s) in the table below.
- Check the light control switch.