Inspection Procedure

1. Enter the "Menu" screen by pressing the "MENU" switch.
2. Select "Set up".
   Fig 1: Identifying Menu Screen Display - Set Up

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Check that "Voice Recognition Guidance" is not OFF.

   OK: Voice Recognition Guidance is not OFF. 

   Fig 2: Identifying Setup Screen Display - Voice Recognition Guidance

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG: TURN VOICE RECOGNITION GUIDANCE "ON" 

OK: GO TO NEXT STEP 

1. Enter the "MICROPHONE & VOICE RECOGNITION CHECK" mode (see NAVIGATION CHECK MODE  ).
   Fig 3: Identifying Recording Switch, Stop Switch, Play Switch And Microphone Input Level Meter

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. When a voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
3. Push the recording switch and perform voice recording.

   HINT:

   The recording limit is 5 seconds.

4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

   OK: All check results are normal. 

NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See  PROBLEM SYMPTOMS TABLE   ) 

OK: END