Inspection Procedure
HINT:
After the inspection completed, clear the DTCs (see DTC CHECK / CLEAR ).
NOTE:
- This code may be output even if there is no malfunction.
- If this code is output frequently, replace the radio receiver.
- CLEAR DTC
- Clear the DTCs (see DTC CHECK / CLEAR ).
- RECHECK DTC
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
NG: REPLACE RADIO RECEIVER ASSEMBLY (See REMOVAL )
OK: END
- Recheck for DTCs and check if the same trouble occurs again.