Inspection Procedure
NOTE:
Be sure to read DESCRIPTION before performing the following procedures.
- CHECK FOR DTC OF OTHER COMPONENTS
- Check if the component shown by the sub-code is displayed in the check result of the other components.
- Check if "01-DC" is output for the other components.
- If "01-DC" is output for any other components, check if the same physical address is displayed.
HINT:
For the list of the components shown by sub-codes, refer to the table in the next step.
Result
RESULT REFERENCEResult Proceed to "01-DC" is output and the same physical address is displayed A "01-DC" is not output or the same physical address is not displayed B
B: Go to step 4
A: GO TO NEXT STEP
- Check if the component shown by the sub-code is displayed in the check result of the other components.
- IDENTIFY COMPONENT WHICH HAS STORED THIS CODE
- Enter the diagnostic mode.
- Press the "LAN Mon" switch to change to "LAN Monitor" mode.
- Identify the component which has stored this code.
Component table
COMPONENT TABLEDisplay Component AUDIO Radio receiver DSP-AMP Stereo component amplifier EMVN Display and navigation assembly CLOCK Clock RSE Television display DVD-P Disc player CAMERA-C Parking assist ECU Rr-CONT Rear power seat module switch XM Satellite radio tuner HINT:
"NAVI" is the component which has stored this code in the example shown in the illustration.
- CHECK COMPONENT WHICH HAS STORED THIS CODE
- Select the component which has stored this code.
Component table
COMPONENT TABLEComponent Proceed to Radio receiver (AUDIO) RADIO RECEIVER COMMUNICATION ERROR Stereo component amplifier (DSP-AMP) STEREO COMPONENT AMPLIFIER COMMUNICATION ERROR Display and navigation assembly (EMVN) DISPLAY AND NAVIGATION ASSEMBLY COMMUNICATION ERROR Clock (CLOCK) CLOCK COMMUNICATION ERROR Television display (RSE) TELEVISION DISPLAY ASSEMBLY COMMUNICATION ERROR Disc player (DVD-P) DISC PLAYER COMMUNICATION ERROR Parking assist ECU (CAMERA) PARKING ASSIST ECU COMMUNICATION ERROR Rear power seat module switch (Rr-CONT) REAR POWER SEAT MODULE SWITCH COMMUNICATION ERROR Satellite radio tuner (XM) SATELLITE RADIO TUNER COMMUNICATION ERROR
NEXT: END
- Select the component which has stored this code.
- CLEAR DTC
- Clear the DTCs (see DTC CHECK / CLEAR
).
HINT:
If "01-DC" is output for only one component, this may not indicate a malfunction.
- Clear the DTCs (see DTC CHECK / CLEAR
).
- RECHECK DTC
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
NG: Go to step 6
OK: END
- Recheck for DTCs and check if the same trouble occurs again.
- CHECK COMPONENT WHICH HAS STORED THIS CODE
- Select the component which has stored this code.
Component table
COMPONENT TABLEComponent Proceed to Radio receiver (AUDIO) RADIO RECEIVER COMMUNICATION ERROR Stereo component amplifier (DSP-AMP) STEREO COMPONENT AMPLIFIER COMMUNICATION ERROR Display and navigation assembly (EMVN) DISPLAY AND NAVIGATION ASSEMBLY COMMUNICATION ERROR Clock (CLOCK) CLOCK COMMUNICATION ERROR Television display (RSE) TELEVISION DISPLAY ASSEMBLY COMMUNICATION ERROR Disc player (DVD-P) DISC PLAYER COMMUNICATION ERROR Parking assist ECU (CAMERA) PARKING ASSIST ECU COMMUNICATION ERROR Rear power seat module switch (Rr-CONT) REAR POWER SEAT MODULE SWITCH COMMUNICATION ERROR Satellite radio tuner (XM) SATELLITE RADIO TUNER COMMUNICATION ERROR
NEXT: END
- Select the component which has stored this code.