Headlight Dimmer Switch: Installation

INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
1. Insert the headlight dimmer switch assembly into the steering column making sure that the stopper's protrusions and cutout parts align.
  
  Fig 1: Locating Headlight Dimmer Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the headlight dimmer switch assembly with the band clamp and claw.
  
  Fig 2: Identifying Headlight Dimmer Switch Assembly With Band Clamp And Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
1. Attach the claw and install the windshield wiper switch.
  
  Fig 3: Locating Windshield Wiper Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connectors.
INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera) (See INSTALLATION )
INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera) (See INSTALLATION )
INSPECT SPIRAL CABLE SUB-ASSEMBLY (See INSPECTION )
INSTALL STEERING WHEEL ASSEMBLY (See INSTALLATION )
INSPECT STEERING WHEEL CENTER POINT
INSPECT STEERING PAD ASSEMBLY (See INSTALLATION )
INSTALL STEERING PAD ASSEMBLY (See INSTALLATION )
INSTALL LOWER NO. 2 STEERING WHEEL COVER (See INSTALLATION )
INSTALL SWITCH AND VOLUME CASE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter (see CUSTOMIZE PARAMETERS ).
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.