Inspection Procedure
- CHECK DTC
- Turn the engine switch off.
- Connect the Intelligent tester or Techstream to the DLC3.
- Turn the engine switch on (IG) and the tester ON.
- Clear the DTC (see DTC CHECK / CLEAR ).
- Turn the engine switch off.
- Turn the engine switch on (IG) and check for DTC.
Result
DTC REFERENCEResult Proceed to DTC is output A DTC is not output B
B: USE SIMULATION METHOD TO CHECK (See HOW TO PROCEED WITH TROUBLESHOOTING )
A: GO TO CAN COMMUNICATION SYSTEM (See CAN COMMUNICATION SYSTEM )