Typical Enabling Conditions
All:
TYPICAL ENABLING CONDITIONS - ALL
| Monitor runs whenever following DTCs are not present | None |
P2111 (Throttle actuator stuck open):
TYPICAL ENABLING CONDITIONS - P2111 (THROTTLE ACTUATOR STUCK OPEN)
| All of following conditions are met: | - |
|---|---|
| System guard* | ON |
| Throttle actuator current | 2 A or more |
| Duty cycle to close throttle | 80% or more |
P2112 (Throttle actuator stuck closed):
TYPICAL ENABLING CONDITIONS - P2112 (THROTTLE ACTUATOR STUCK CLOSED) (1 OF 2)
| All of following conditions are met: | - |
|---|---|
| System guard* | ON |
| Throttle actuator current | 2 A or more |
| Duty cycle to open throttle | 80% or more |
TYPICAL ENABLING CONDITIONS - P2112 (THROTTLE ACTUATOR STUCK CLOSED) (2 OF 2)
| *System guard set when following conditions are met: | - |
|---|---|
| Throttle actuator | ON |
| Throttle actuator duty calculation | Executing |
| Throttle position sensor | Fail determined |
| Throttle actuator current-cut operation | Not executing |
| Throttle actuator power supply | 4 V or more |
| Throttle actuator | Fail determined |