LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Transfer Case) >> Transfer Wire >> Inspection

Transfer Wire: Inspection

WARNING: This page is about a different car, the 2007 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRANSFER WIRE 
    1. Disconnect the transfer wire connector.
    2. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying Transfer Transmission Wire Connector
      G05318659Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      STANDARD RESISTANCE SPECIFICATION

      Tester Connection Specified Condition
      i1-1 - i1-2 5.0 to 5.5 Ω
      i1-1 - Body ground 1 MΩ or higher
      i1-2 -Body ground 1 MΩ or higher

      If the resistance is not specified, replace the transfer wire.

scientia non olet · About LEMON Manuals