Fuel Pump: Inspection

INSPECT FUEL PUMP
1. Inspect the resistance of the fuel pump.
  1. Using an ohmmeter, measure the resistance between terminals 1 and 2.
    Standard resistance: 0.2 to 3.0 Ω at 20°C (68°F)
    
    If the result is not as specified, replace the fuel pump.
2. Inspect the operation of the fuel pump.
  1. Connect the battery's positive (+) lead to terminal 1 of the connector, and the negative (-) lead to terminal 2. Check that the fuel pump operates.
    
    Fig 1: Identifying Fuel Pump Connector Terminals
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  NOTE:
  - These tests must be performed within 10 seconds to prevent the coil from burning out.
  - Keep the fuel pump as far away from the battery as possible.
  - Always turn the voltage on and off on the battery side, not on the fuel pump side.