LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> IS 350 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat >> Lumbar Support Adjuster Assembly >> Reassembly

Lumbar Support Adjuster Assembly: Reassembly

  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY 
    1. Install the lumbar support adjuster with the 2 screws.
    2. Connect the connector.
    Fig 1: Identifying Screws And Lumbar Support Adjuster
    G05254005Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SEPARATE TYPE SEATBACK ASSEMBLY (w/o Seatback Board) (See  INSTALLATION   ) 
  3. INSTALL FRONT SEPARATE TYPE SEATBACK ASSEMBLY (w/ Seatback Board) (See  INSTALLATION   ) 
  4. INSTALL FRONT SEAT HEADREST SUPPORT 
  5. INSTALL FRONT SEAT HEADREST SUPPORT 
  6. INSTALL FRONT SEAT BACK BOARD SUB-ASSEMBLY (w/ Seatback Board) 
  7. INSTALL FRONT INNER SEAT CUSHION SHIELD 
  8. INSTALL FRONT SEAT CUSHION SHIELD WITH INNER NO. 1 CUSHION SHIELD 
  9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB 
  10. INSTALL RECLINING POWER SEAT SWITCH KNOB 
  11. INSTALL FRONT SEAT INNER BELT ASSEMBLY (See  INSTALLATION  ) 
  12. INSTALL FRONT SEAT ASSEMBLY 
  13. INSTALL REAR INNER SEAT TRACK COVER 
  14. INSTALL REAR OUTER SEAT TRACK COVER 
  15. INSTALL FRONT INNER SEAT TRACK BRACKET COVER 
  16. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER 
  17. INSTALL FRONT SEAT HEADREST ASSEMBLY 
scientia non olet · About LEMON Manuals