Data List / Active Test
- READ DATA LIST
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG).
- Operate the intelligent tester according to the display and select "Data List".
Clearance warning ECU:
CLEARANCE WARNING ECU DATA LISTItem Measurement Item / Range (Display) Normal Condition Diagnostic Note MAIN SW Clearance sonar main switch / OFF or ON OFF: Clearance sonar main switch OFF
ON: Clearance sonar main switch ON- FL SENS Front left sensor information / UNDTCT, LONG, M LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- FR SENS Front right sensor information / UNDTCT, LONG, M LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- RL SENS Rear left sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- RL CENTER SENS Rear left center sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- RR CENTER SENS Rear right center sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- RR SENS Rear right sensor information / UNDTCT, LONG, MIDDLE, CLOSE, FREEZE, OPEN or BLINK UNDTCT: Not detected
LONG: Detected (long-range)
M LONG: Detected (mid long-range)
MIDDLE: Detected (medium-range)
CLOSE: Detected (close-range)
OPEN: Open (Open in sensor)
FREEZE: Freeze (Sensor is frozen)
BLINK: Blink (All displays blinking)- RR BUZ RANGE Rear buzzer onset range / NARROW or WIDE NARROW: 600 mm (23.62 in.)
WIDE: 1,500 mm (59.06 in.)Buzzer activation range can be customized KEEP SENSE BUZ Keep sense status buzzer / NOT AVL or AVAIL NOT AVL: Buzzer sound stops in 3 sec.
AVAIL: Buzzer sound does not stopBuzzer can be stopped when an obstacle is at the same position for 3 sec. or more F & R BUZZER VOLM Front & rear buzzer volume / L, M1, M2, M3, or H L: Low volume
M1: Medium low volume
M2: Medium volume
M3: Medium high volume
H: High volumeBuzzer volume can be customized NON-P/R RNG SEN Non P/R range sensor / F, Rcrn2 or F F, Rcrn 2: Corner sensors are available
F: Front sensors are availableSensors in positions other than P and R can be customized - PERFORM ACTIVE TEST
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG).
- Following the display on the intelligent tester, perform the "Active Test".
Clearance warning ECU:
CLEARANCE WARNING ECU ACTIVE TESTItem Vehicle Condition / Test Details Diagnostic Note REAR BUZZER Rear buzzer (Clearance warning buzzer) / STOP or OPERATE -