LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Automatic Transaxle) >> Valve Body Assembly >> Removal

Valve Body Assembly: Removal

WARNING: This page is about a different car, the 2007 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN AUTOMATIC TRANSMISSION FLUID (See  REMOVAL   ) 
  2. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY (See  REMOVAL   ) 
  3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY (See  REMOVAL   ) 
  4. DISCONNECT TRANSMISSION WIRE (See  REMOVAL   ) 
  5. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 
    1. Remove the 20 bolts and valve body.
      Fig 1: Identifying Valve Body Bolts
      G05316981Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Separate the lever pin from the manual valve.
      Fig 2: Identifying Groove Of Manual Valve With Pin Of Lever
      G05316982Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the check ball body and spring.
      NOTE: Do not drop the check ball body and spring.
      Fig 3: Identifying Check Ball Body And Spring
      G05316983Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals