Data List / Active Test

1. DATA LIST 

   HINT:

   Using the intelligent tester DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to shorten labor time.

   1. Connect the intelligent tester (with CAN VIM) to the DLC3.
   2. Turn the engine switch on (IG).
   3. Enter the following menus: DIAGNOSIS / OBD/ MOBD / MAIN BODY or BODY NO. 5 / DATA LIST.
   4. Read the DATA LIST according to the display on the tester.

   MAIN BODY (Main body ECU RH): 

   ITEM REFERENCE TABLE
   
   

   Item	Measurement Item/Display (Range)	Normal Condition	Diagnostic Note
   LUGG COURTSY SW	Luggage compartment door courtesy switch/ON or OFF	ON: Luggage compartment door is OPEN OFF: Luggage compartment door is CLOSED	-
   IG SW	Ignition switch signal/ON or OFF	ON: Turn the engine switch on (IG) or start OFF: Turn the engine switch off or on (ACC)	-
   PASSIVE MODE	Passive mode/ON or OFF	ON: Passive mode ON OFF: Passive mode OFF	-
   WARN BY HORN	Warning by horn/ON or OFF	ON: Vehicle horns sound during alarm sounding state OFF: Vehicle horns do not sound during alarm sounding state	-
   ENTRY DELAY	Entry delay time during passive mode	0s: Entry delay time is 0 sec. 14s: Entry delay time is 14 sec. 30s: Entry delay time is 30 sec.	-
   P LOCK POS SW	Passenger lock position switch/ON or OFF	ON: Passenger door is LOCKED OFF: Passenger door is UNLOCKED	-
   Rr LOCK POS SW	Rear lock position switch/ON or OFF	ON: Rear door is LOCKED OFF: Rear door is UNLOCKED	-
   Rr DOR CTY SW	Rear door courtesy switch/ON or OFF	ON: Rear door is OPEN OFF: Rear door is CLOSED	-
   P DOR CTY SW	P door courtesy switch/ON or OFF	ON: Front passenger side door is OPEN OFF: Front passenger side door is CLOSED	-
   D DOR CTY SW	D door courtesy switch/ON or OFF	ON: Driver side door is OPEN OFF: Driver side door is CLOSED	-

   BODY NO.5 (Front controller): 

   ITEM REFERENCE TABLE
   
   

   Item	Measurement Item/Display (Range)	Normal Condition	Diagnostic Note
   HOOD CURTSY SW	Engine hood courtesy switch signal/ON or OFF	ON: Engine hood is OPEN OFF: Engine hood is CLOSED	-

2. ACTIVE TEST 

   HINT:

   Performing the intelligent tester ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to shorten the labor time. The DATA LIST can be displayed during the ACTIVE TEST.

   1. Connect the intelligent tester (with CAN VIM) to the DLC3.
   2. Turn the engine switch on (IG).
   3. Enter the following menus: DIAGNOSIS / OBD/ MOBD / MAIN BODY of BODY NO. 5 / ACTIVE TEST.
   4. Perform the ACTIVE TEST according to the display on the tester.

MAIN BODY (Main body ECU RH): 

BODY NO.5 (Front controller):