LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> IS 250 AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent >> Engine Hood Courtesy Switch >> Installation

Engine Hood Courtesy Switch: Installation

  1. INSTALL HOOD LOCK ASSEMBLY (See Step 3 in  INSTALLATION  ) 
  2. INSTALL HOOD LOCK CONTROL CABLE COVER (See Step 4 in  INSTALLATION  ) 
  3. INSTALL LOW PITCHED HORN ASSEMBLY (See  INSTALLATION  ) 
  4. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) (See  INSTALLATION  ) 
  5. INSTALL FRONT BUMPER ASSEMBLY 
  6. INSTALL COOL AIR INTAKE DUCT SEAL 
  7. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) (See  ADJUSTMENT  ) 
  8. VEHICLE PREPARATION FOR FOG LIGHT AIM (See  ADJUSTMENT  ) 
  9. PREPARATION FOR FOG LIGHT (See Step 2 in  ADJUSTMENT  ) 
  10. FOG LIGHT AIMING INSPECTION (See Step 3 in  ADJUSTMENT  ) 
  11. FOG LIGHT AIMING ADJUSTMENT (See Step 4 in  ADJUSTMENT  ) 
scientia non olet · About LEMON Manuals