Ultrasonic Sensor: Removal
- REMOVE COOL AIR INTAKE DUCT SEAL (See step 2 in REMOVAL
)
- REMOVE FRONT BUMPER ASSEMBLY (See step 3 in REMOVAL
)
- REMOVE NO. 1 ULTRASONIC SENSOR
- Disconnect the sensor connector.
- Remove the sensor retainer as shown in Fig 1
.
- Remove the No. 1 ultrasonic sensor from the front bumper.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE LUGGAGE COMPARTMENT TRIM COVER
- REMOVE DECK SIDE TRIM BOX LH
- REMOVE DECK SIDE TRIM BOX RH
- REMOVE ROPE HOOK ASSEMBLY (See step 5 in REMOVAL
)
- REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER (See step 6 in REMOVAL
)
- REMOVE ROOM LIGHT ASSEMBLY (See step 7 in REMOVAL
)
- REMOVE ROPE HOOK (See step 8 in REMOVAL
)
- REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (See step 9 in REMOVAL
)
- REMOVE LUGGAGE COMPARTMENT TRIM HOOK (See step 10 in REMOVAL
)
- REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER (See step 11 in REMOVAL
)
- DISCONNECT LUGGAGE ROOM WIRE (See step 12 in REMOVAL
)
- REMOVE REAR BUMPER PLATE (See step 13 in REMOVAL
)
- REMOVE REAR BUMPER ASSEMBLY (See step 14 in REMOVAL
)
- REMOVE NO. 2 ULTRASONIC SENSOR
- Disconnect the sensor connector.
- Remove the sensor retainer as shown in Fig 2
.
- Remove the No. 2 ultrasonic sensor from the rear bumper.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE NO. 1 ULTRASONIC SENSOR
- Disconnect the sensor connector.
- Remove the sensor retainer as shown in Fig 3
.
- Remove the No. 1 ultrasonic sensor from the rear bumper.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002