Inspect Vacuum Switching Valve Assembly

Using an ohmmeter, check that there is continuity between each terminal. Resistance: 33 to 39 Ω at 20°C (68°F)
If there is no continuity, replace the VSV.

Fig 1: Checking That There Is Continuity Between Each Terminal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Using an ohmmeter, check that there is no continuity between each terminal and the body. Resistance: 10 kΩ or higher . If there is continuity, replace the VSV.

Fig 2: Checking That There Is No Continuity Between Each Terminal And Body
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Check that air flows from port E to the filter.

Fig 3: Checking That Air Flows From Port E To Filter
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Apply battery voltage across the terminals.
Check that air flows from port E to port F. If operation is not as specified, replace the VSV.

Fig 4: Checking That Air Flows From Port E To Port F
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002